What is toughened glass?
Toughened glass — also called tempered glass — is ordinary float glass that has been heat-treated and rapidly cooled. The process makes it several times stronger than annealed glass and changes how it breaks: instead of sharp shards, it crumbles into small, relatively blunt granules.
Because of that safety behaviour, toughened glass is the standard choice anywhere people might impact the glass or where breakage would be dangerous.
Where toughened glass is used
In homes and commercial spaces, toughened glass covers most safety-critical glazing:
- Shower enclosures and bathroom partitions
- Office and shopfront partitions and doors
- Glass railings for staircases and balconies
- Tabletops, shelves and display units
- Glass canopies and facades
Choosing the right thickness
Thickness depends on the size of the panel and the load it carries. Larger unsupported spans and higher loads need thicker glass — when in doubt, share the opening sizes and application and get a recommendation before ordering.
- 5–6 mm — shelves, small partitions, cabinet shutters
- 8 mm — shower enclosures, medium partitions
- 10 mm — doors, large partitions, railings
- 12 mm — large spans, heavy-duty partitions and railings
Why measurements must be final before ordering
Toughened glass cannot be cut, drilled or edged after tempering — any change means remaking the panel. All cutting, notches for patch fittings, hinge cut-outs and polishing happen before toughening.
Measure carefully (or have the opening measured), decide the fittings first so notches match, and only then place the order. This single habit prevents most toughened-glass ordering mistakes.
Clear, frosted or both?
Toughened glass is available clear and with frosted (acid-etched or sandblasted) finishes. Frosted toughened glass is popular for bathroom partitions and office cabins where privacy and light are both needed.